Telecom Shrouds, Radomes & FRP Structures
Telecom Shrouds, Radomes & FRP Structures – Trusted Composite Solutions for Network Infrastructure
Craft Fibreglass is a leading Australian manufacturer of Telecom Shrouds, Radomes & FRP Structures. We design and build weatherproof, UV-stable and radio-frequency RF transparent composite enclosures that protect critical telecom and broadcast equipment. Whether mounted on rooftops, towers or poles, our custom made radomes and shrouds are built to perform in Australia’s toughest outdoor conditions while maintaining signal strength and aesthetics.
Our telecom housing solutions are trusted by mobile network operators, broadcast providers and infrastructure contractors across the country. From high performance 5G antenna covers to custom radio housings and street level FRP enclosures, Craft Fibreglass delivers durable, non-conductive and low maintenance solutions to protect your equipment and improve network reliability
What We Manufacture
We manufacture a full range of Telecom Shrouds, Radomes & FRP Structures tailored to fit your equipment needs, installation sites and network design. All GRP components are locally manufactured in our Sydney facility using proven processes and high quality materials that meet Australian compliance standards.
Radomes and Antenna Shrouds
Our radomes and antenna shrouds are engineered for optimal RF transparency, mechanical strength and resistance to environmental wear. Applications include:
- 5G antenna covers – Designed to house and protect mm Wave and mid band antennas without interfering with signal transmission.
- Panel antenna shrouds – Custom shaped enclosures for rooftop and tower mounted panel arrays, sized to specific antenna brands and models.
- Omni directional radomes – Cylindrical or dome shaped covers for pole top antennas and broadcast beacons.
- Sector antenna shrouds – Multi panel designs for directional antennas used in mobile and fixed wireless systems.
- Stealth radomes – Architecturally integrated shrouds designed to conceal telecom equipment within building facades, signage or flagpoles for minimal visual impact.
All radomes are manufactured from RF transparent fibreglass reinforced plastic (FRP), providing long term durability without impacting signal strength. We offer a wide range of finishes, colours and textures to match your project’s aesthetic and environmental needs.
Equipment Enclosures and Infrastructure Panels
In addition to radomes, Craft Fibreglass manufactures tough, weather-resistant FRP enclosures and structural panels for broader telecom infrastructure use, including:
- Cabinet shrouds and vault lids for street-level equipment housing.
- Wall mounted FRP housings for routers, switches, or signal boosters.
- Roof hatch enclosures and vented covers to protect rooftop installations.
- Mounting brackets and integrated support panels made from composite material.
- Weather covers and splash guards for critical electrical or antenna junctions.
Our FRP structures are non-conductive, corrosion-proof and lightweight, making them ideal for rooftop, marine and industrial installations.
Benefits of Using FRP for Telecom Structures
RF Transparency
- FRP allows radio signals to pass through without interference, making it perfect for covering antennas and transmitters.
- Unlike metals, it doesn’t block or distort signal strength, ensuring consistent performance.
Durability in Harsh Environments
- UV-stabilised resins and weatherproof finishes resist sun, rain, wind, and coastal conditions.
- FRP holds up against corrosion, impact, and thermal cycling, even in extreme environments.
Lightweight and Easy to Install
- FRP structures are much lighter than steel or aluminium, simplifying transport and rooftop mounting.
- Lightweight design reduces structural loading, especially important for building and tower installations.
Low Maintenance
- Smooth, sealed surfaces resist dirt, moisture, and chemical damage.
- No rusting or peeling, reducing the need for repainting or replacements.
Customisable Design
- FRP can be moulded into almost any shape, with internal mounting points, air vents, or cable routing built in.
- Available in various gelcoat colours or textures to suit visual or stealth applications.
Long Service Life
- FRP doesn’t degrade over time like plastics or painted metal, delivering dependable protection over decades.
- Our radomes and shrouds remain dimensionally stable and maintain appearance in outdoor use.
Common Use Cases & Install Locations
Craft Fibreglass radomes and FRP enclosures are deployed across a wide range of real world telecom and broadcast environments. Our structures are engineered to meet the specific demands of diverse operating conditions while ensuring long-term protection and minimal interference. Common installation sites include:
- Urban rooftops and high rise buildings: Ideal for 5G and LTE antenna installations, especially where stealth integration or minimal structural loading is required.
- Telecommunications towers and monopoles: Durable radomes for panel or omni antennas mounted at height, protecting against wind, UV and bird damage.
- Shopping centres and commercial buildings: Custom-coloured and architecturally integrated shrouds that maintain aesthetic appeal in customer-facing environments.
- Transport infrastructure: Used in train stations, tunnels, or depots where weather resistance and tamper-proof housing are essential for operational continuity.
- Coastal and marine installations: Salt-tolerant FRP housings deployed near the ocean, where corrosion resistance is critical.
- Remote or off-grid sites: Lightweight, solar-compatible cabinets and radomes for use in mines, remote telemetry hubs or emergency communications setups.
Our Telecom Shrouds, Radomes & FRP Structures support everything from small cell rollouts and DAS networks to nationwide broadcast infrastructure, offering flexible designs to suit almost any installation scenario.
From dense urban areas to remote regional coverage zones, our structures are tailored to meet diverse telecom infrastructure needs.
Who We Work With
Craft Fibreglass supports a wide range of telecom industry clients, including:
- Mobile network operators rolling out 5G and LTE infrastructure across Australia.
- Tower and rooftop asset owners seeking stealth radomes and antenna concealment.
- Broadcast companies requiring weatherproof covers for TV, radio or emergency signal beacons.
- Electrical and telecom contractors installing equipment cabinets and outdoor enclosures.
- Local councils and developers integrating FRP structures into buildings and public spaces.
Whether you need a one-off radome or a production run of custom shrouds, we deliver expert support, fast turnaround, and consistent quality.
Our Telecom Industry Capabilities
At Craft Fibreglass, we combine advanced composite technology with hands-on manufacturing experience to deliver purpose-built telecom solutions. Our team supports your project from concept to installation:
Design & Engineering
- CAD-based design services ensure a precise fit to your antennas, brackets or existing infrastructure.
- Load analysis is used to match design to real world stress and conditions.
Tooling and Mould Making
- We produce durable master moulds to ensure accurate, repeatable production.
- Moulds can be created from your digital files or reverse engineered from samples or drawings.
Composite Manufacturing
- Hand lay-up, vacuum infusion and closed mould processes allow us to match the scale and complexity of your order.
- We use high quality polyester, vinyl ester or epoxy resins tailored to your performance requirements.
Finishing and Assembly
- Parts are finished in smooth, UV-resistant gelcoat and can be coloured to blend with the environment.
- We offer pre-drilled mounts, assembly hardware, and integration with vents, cable ports, or weather seals.
Quality and Compliance
- ISO 9001:2016 certified production processes.
- FRP / GRP Telecom Shrouds, Radomes & Structures built to meet Australian and global telecom industry standards.
- Batch traceability and QA checks for every order.
Why Choose Craft Fibreglass
Choosing Craft Fibreglass means choosing a manufacturer that understands the specific needs of the telecom industry. Here’s why clients across Australia rely on us:
- Made in Australia – All radomes and FRP structures are built in our Sydney factory, ensuring quality control and faster lead times.
- Telecom expertise – Decades of experience supplying RF-sensitive housings and shrouds to national telecom clients.
- Custom solutions – We work with your engineering team to build enclosures that fit your antennas, mounts, and project requirements.
- Durability tested – Every part is built to withstand harsh Australian conditions for long-term performance.
Responsive support – Our team provides drawings, samples, and advice to help you get the right fit the first time.
Contact Us for Telecom Shrouds, Radomes & FRP Structures
Need a reliable solution to protect your telecom equipment? Contact Craft Fibreglass today. From custom radomes and antenna shrouds to rugged FRP enclosures and panels, we’re ready to deliver the high-performance protection your network needs.
We’ll help you build lighter, stronger, and smarter – with composite solutions that stand up to the elements and keep your signals strong.